The UTTER GUYS - Discount Tools For Every Trade :: SawTrax :: 3000 Series Package :: 3074 74" Crosscut x 10ft Frame Panel Saw

3074 74" Crosscut x 10ft Frame Panel Saw

3074 74" Crosscut x 10ft Frame Panel Saw

3074 74" Crosscut x 10ft Frame Panel Saw

Bosch Worm Drive

Milwaukee 10" Saw

Accu-Glide Bearings

Accu-Glide Sealed Bearings

Sleeve

Steel Sleeve over Roller and Hub

3000 Series of panel saws use 10" blades, the most common blade used in cabinet shops for their table saws and radial arm saws.  For cutting Melamine we recommend a HI AT blade such as the Frued LU98R010 or similar blade from Forrest. This is a great choice for trimming doors!

This saw can cut 2 7/8" deep with the dust brush removed or 21/2" deep with the dust brush in place.  It is perfect for trimming doors or other thick stock where a long cross cut or rip cut is needed.

The saw motor is taken off it's original shoe and mounted to our shoe using the saw's mounting screws, a motor support bracket/clamp and a handle support bracket.  It uses the dust port in the rear of the saw for dust extraction with a dust shield and hose attaching plate. 
Will not bevel cut or score cut.

 
View 3000 Panel Saw Cutting Melamine Med Def, High Def Shipped assembled.

Standard Equipment Features Optional Equipment
15 Amp Milwaukee 10 'Saw 50", 62", 74 Mid Fence

2.5" Dust Port, Dust Brush, 2.5"-Dust Hose

Rip Cut in Either Direction, unlimited Floating Router Insert
Steel Sleeved Rollers .0156 Accuracy on cross cut Spring hold downs
Carbide Tipped blade Can use router in same carriage Knife Cutter
10' steel powder coated frame 2.875" depth off cut max without brush Frame Dust Upgrade
Nickle Chrome 1/8" wall steel guide tubes, 1.75" OD 2 carriage locks ensures no play when ripping 60 tooth carbid tipped aluminum blade 60 tooth carbid tipped plastics blade 40 tooth carbid tipped wood blade
Detachable tool plate Uses 10" or 10.25" saw blades

Laser Pointer

18 Injected Molded plastic maertial rollers with steel hubs and steel sleeves Easy tool insert changes  
Spring loaded counter balance 18 material support rollers, most in class  
Saw cord holder 1 simple squaring adjustment that locks in place, (rollers don't adjust), doesn't go out of square, factory aligned  
2 carriage locks    
Dust hose channel    
Folding stand with wheels for frame    
stop, strip bar and left / right tapes    
Dual rip pointers

 

 
Accu-Square alignment System    
Accu-Glide Steel Sealed Bearings    
Spinning Saw Insert    

IMPORTANT, PLEASE READ* The shipping price quoted here applies to a business address with a fork lift or customer pick-up at the local shipping terminal ONLY. Please call for residential delivery pricing. We no longer offer combined shipping prices to due new lower shipping prices. Warehouse pickup is only allowed from our Florida location to save shipping cost If shipping to a freight terminal we will provide the address and phone number of the freight terminal nearest to you served by the trucking company we choose. Your shipping location must be accessible by a tractor-trailer truck. Truck drivers are also subject to a number of regulations, one of which is that they are not required to give any assistance in unloading. Please be prepared for this type of delivery, as you are responsible for unloading the item(s) and placing them in your shop. This normally takes a number of people. This does not apply to businesses run from a residential address. Freight companies do not consider this a business. We recommend that you make arrangements with the trucking company to take delivery at the freight terminal if you can. They will load it on your vehicle. Make sure your vehicle is capable of handling the weight. Also, bring plenty of tie downs to properly secure the load. Some terminals have other delivery services available such as lift gate service for an additional cost (Call for specifics) (Paid directly over the phone to us as it is not added into the shipping charges listed) We have great service from the trucking companies we deal with. However, sometimes shipping damage can occur. It is extremely important to inspect and note any damage that might be suspect. Holes, dents, tears, etc. should be noted on the form the driver gives you to sign accepting delivery. The notations will allow us to make a claim for shipping damage on your behalf. Failure to do so makes it extremely difficult to make a claim. If there is shipping damage and you have noted it on the delivery form, you can email us at andrewutterguys@yahoo.com or call our customer service department at 800-249-5591. We will take care of all the necessary arrangements to have the problem resolved

Details
SKU 35983
Weight 412.00 lbs
 
The Utter price: $4179.05
Options
Quantity

Send to friend

: *
: *
: *
 

Customer feedback

Customer Reviews

There have been no reviews for this product.